Ethernet Accessory Add-On

The TD-XPAH-ETH-HAT was developed from the Teledatics Kicad daughterboard 'hAT' template. The Kicad template can be installed in Kicad 6.x or newer versions.

The Teledatics GUI standalone mode firmware automatically recognizes and initializes the Ethernet hAT on boot.

The Wi-Fi IP address is shared with the Ethernet device.

The TD-XPAH-ETH-HAT uses the ENC28J60 SPI-Ethernet chip that converts Ethernet signals and sends them over the SPI bus. All required software and drivers are included in the open source Teledatics GUI firmware source code tree on our github repository.